Afficher panier (0 Article) Mon compteAfficher bloc-notesAller à la caisse

Aves Apoxie Paste

an innovative adhesive medium used to permanently fill, bond, seal, customize & fabricate most materials. Batter-like consistency is stir-able, yet thick enough that it tends to stay put; spread thick or thin with a tool or craft stick. Tint with pigments to create a desired color. Smooths with water to a semi-gloss finish. Great for arts & crafts, jewelry, stone setting, taxidermy, casting with flexible molds & more. Apply to foam or other materials for a hard surface coat, to add texture, or embellish. Use as an adhesive for many projects!

*If paste is firm or to make thinner, gently heat [Part A] container in hot (not boiling) water for 10 minutes *CAUTION: Paste will be HOT & STICKY! Allow product to cool before mixing with [Part B]. Heat accelerates working time.

Using separate tools or craft sticks & disposable surface/cup: Measure equal parts of A & B.
Mix vigorously 2 minutes until thoroughly combined. Incomplete mixing will give poor results. Work time 1-3 hrs. Optional: mixed paste may be tinted with paint or pigment. (A little pigment goes a long ways).
Apply (to a clean, debris-free surface) as desired or pour for casting. Smooth or texture with a wet brush or tool.
Clean up: Soap & Water or Aves® Safety Solvent (very helpful for smoothing, removing finger prints & cleaning up product residue before set-up). 24 hr full cure. Finish as desired. Outdoor & Marine Quality!
Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B. Wear a dust mask and safety glasses when sanding cured product…[P280] *Keep out of reach of children…[P102] *Safe for adults when used as directed. 24 hour full cure is required for hard finishing purposes such as sanding, carving, drilling, machining, etc. Keep containers sealed when not in use.

WARNING – May cause an allergic skin reaction and eye irritation. Hazard Statements – H317 May cause an allergic skin reaction. H320 Causes eye irritation.

Naviguer par application ..

Ces produits sont classés par application telles que, le moulage du corps humain, le moulage, les tirages, les produits transparents, la restoration, le prototypage, etc...

  • Moulage

    Une gamme de matériaux de moulage souples et rigides.

  • Tirage

    Une large gamme de matériaux de tirage souples et rigides

  • special properties

  • Matériaux composites

    Résines et fibres pour la construction en matériaux composites.

  • Mousses

    Mousse PU flexible liquide, mousse PU rigide liquide, blocs de mousse PU rigide et mousse de latex.

  • Restauration

    Matériaux pour la restauration des ornements et des bâtiments, à l'intérieur et à l'extérieur.

  • Prototypage

    Matériaux utilisés pour le prototypage rapide.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Informations générales Options d'envoi Costumer Projects Marques Applications Branches