Afficher panier (0 Article) Mon compteAfficher bloc-notesAller à la caisse

Derma-tac

Pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin. Derma-tac™ is skin safe and certified by an independent laboratory per OECD Test Guideline 439. This is a low odor formulation which is cosmetic grade and non-irritating

  • Derna-Tac adhesive /28gr

    Derma-tac™ silicone prosthetic adhesive is a pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin.

    26,00 EUR (Prix exclusif 21% TVA)

  • Derma-Tac /112gr

    Derma-tac™ silicone prosthetic adhesive is a pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin.

    83,75 EUR (Prix exclusif 21% TVA)

  • Derma-Tac Remover /112gr

    Derma-tac™ Remover is an easy-to-use one component liquid that will dissolve Derma-tac™ and aid in removing appliances from the skin.

    13,80 EUR (Prix exclusif 21% TVA)

  • Derma-Tac Remover /360gr

    Derma-tac™ Remover is an easy-to-use one component liquid that will dissolve Derma-tac™ and aid in removing appliances from the skin.

    41,20 EUR (Prix exclusif 21% TVA)

Instructions

PREPARATION...
Important: Shake Derma-tac™ container well before using.

Preparation - Clean the skin with soap and water to remove any oils which may affect the bond of the Derma-tac™ adhesive. Allow skin to dry completely.

APPLICATION & REMOVAL...
Acclerating / Lowering Viscosity – Drying time can be reduced with NOVOCS Gloss Silicone Solvent. Adding 10% NOVOCS gloss by weight will lower viscosity and reduce dry time by about ½.
Application - Derma-tac™ adhesive can be applied using a cotton swab, non-latex makeup sponge or suitable makeup brush. Apply adhesive to the surface of the skin or appliance. When applying on areas of high stretch or movement, such as around the mouth, adhesive can be applied to both the skin and the appliance.
Important: Allow Derma-tac™ to evaporate completely. This adhesive will not work unless it has thoroughly dried. Once Derma-tac™ has dried, press the makeup appliance in place. Derma-tac™ is a pressure sensitive adhesive, the firmer you press, the better the adhesive bond.
Appliance Removal Using Derma-tac™ Remover - Apply Derma-tac™ Remover using a cotton swab, cotton ball or suitable makeup brush. Work the Derma-tac™ remover under the edges of the appliance and onto the skin. work the appliance away from the skin slowly, taking particular care around the eyes, nose and mouth.
Once the Derma-tac™ has been removed, the skin should be cleaned and moisturized using a cosmetic cleanser and moisturizer.

Naviguer par application ..

Ces produits sont classés par application telles que, le moulage du corps humain, le moulage, les tirages, les produits transparents, la restoration, le prototypage, etc...

  • Moulage

    Une gamme de matériaux de moulage souples et rigides.

  • Tirage

    Une large gamme de matériaux de tirage souples et rigides

  • special properties

  • Matériaux composites

    Résines et fibres pour la construction en matériaux composites.

  • Mousses

    Mousse PU flexible liquide, mousse PU rigide liquide, blocs de mousse PU rigide et mousse de latex.

  • Restauration

    Matériaux pour la restauration des ornements et des bâtiments, à l'intérieur et à l'extérieur.

  • Prototypage

    Matériaux utilisés pour le prototypage rapide.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Informations générales Options d'envoi Costumer Projects Marques Applications Branches