Ease Release™ 2831 /2,72 kg

Ease Release™ 2831 is a wax-based non-silicone release agent. It has proven to be effective when used to release polyurethane foams elastomers. Ease Release™ 2831 works with aluminum, steel, and elastomeric mold construction.

Features

- Excellent Release
- Non-Silicone
- Contains no chlorinated or CFC solvents
-Low wax build-up
-Increased productivity
-Excellent cleanability
-Low environmental hazards
-Low mold maintenance

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.

Store and use material at room temperature 23°C. This product has a limited shelf life and should be used as soon as possible.

SHAKE WELL BEFORE USING

Applying - Apply a coat of Ease Release™ 2831 with a spray or brush, and allow to dry. Rub Ease Release™ 2831 into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of Ease Release™ 2831 after each molding cycle.

Finishing - Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.