Ease Release 200 aerosol /400 gr

Le Ease release 200/205 est un excellent agent démoulant pour le moulage et le tirage de pièces de différentes natures.
Cet additif facilitera le démoulages de élatomères silicones et polyuréthanes, des résines polyuréthanes et des polymères thermoplastiques.

Idéal pour le démoulage:
modèle original/moule silicone
moule silicone/tirage élastomère silicone
moule silicone/tirage élastomère polyuréthane
moule silicone/tirage résine

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.

Store and use material at room temperature 23°C. This product has a limited shelf life and should be used as soon as possible.

SHAKE WELL BEFORE USING

Applying - Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coatings and oils. Apply Ease Release™ 200 using aerosol spray or spray equipment for bulk grades. Hold the can (or spray gun) 6 to 8 inches from the mold surface to ensure a light, even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release™ 200 before a regular molding. Ease Release™ 200 is fast drying and requires no baking during the normal molding process. Reapply a light coating before each molding.

Finishing - Thorough cleaning of molded parts is required prior to staining, painting, or bonding