ICT Clean & Set /0,946 lt

Clean & Set est la troisième et dernière étape du système d'étanchéité ICT. Il accélère le durcissement du scellant FS Seals. De plus, c'est un moyen efficace de nettoyer les surfaces traitées avec les TIC. Clean & Set est à base d'acide acétique et doit être mélangé avec trois parties d'eau.

Instructions

Product Overview

ICT Clean and Set is the final step in the ICT sealing system. It accelerates the curing of ICTsealer products and is also effective as a cleaner for concrete sealed with ICT.

Application as a Cure Accelerator

Allow freshly applied ICT Primer and Finish Applications to cure for a minimum of 2 hours before proceeding to the Clean and Set Application. Applying Clean And Set activates the early water repellency, hardness, and scratch resistance of the freshly sealed surfaces.

Clean and Set Wipe Down Surface Technique

Dampen a paper towel with Clean and Set. Evenly wipe the damp towel over all sealer surfaces. Allow the vapor residue to dry onthe surface. After the residue has dried, use a clean cloth and water to wipe down surfaces,removing any Clean and Set residue.

Important Note

For several weeks after applying the sealer you may notice the concrete darken in the areas where water and objects are left on the surface. This is normal as the cross linking of the sealer
continues. Darkening of the surface is not an indication that the sealer is not working. In fact it is a normal reaction as the sealer continues to cure.

When Used as a Cleaner

When using as a cleaner, dilute Clean And Set at 3 parts water to 1 part Clean and Set. Wipe using a soft cloth and allow to dry.